Data Protection – VDPA
Data Protection – vSphere 6.0 Licensing:
Data Protection Advanced backup features (app-aware agents, replication, integration with Data Domain, etc.) are now available as part of most vSphere 6 editions under Data Protection.
- Up to 8TB of deduplicated data per appliance
- Up to 800 VMs per appliance
- Up to 10 appliances per vCenter Server
- Application level backup and restore of SQL Server, Exchange, SharePoint
- Data Domain Support
- Replication to VDP Appliances and EMC Avamar
- Parallel backups Up to 64 simultaneous backups
**OLD** VDPA – Data Protection Advanced – vSphere 5 – Licensing:
vSphere Data Protection Advanced is licensed in the following ways:
- Per CPU (processor) on a virtualized server, that is, one license of VDP Advanced is required for each CPU of vSphere hosts running protected virtual machines.
- Per Operating System Instance on a physical server.
DR site licensing on VDP Advanced:
- If you need to backup at both sites then you must have license for all the hosts. However, if on Site B you only use VDPA to capture the backups from site A and do not backup any machines locally at site B then there is no need for license on Site B.
Important Note: VDP + VDPA require the vSphere Web Client to Work. Does not work in regular vSphere Client.
Important Note: VDP Advanced is required to replicate to another VDP Advanced virtual appliance.
VDP is a robust, simple-to-deploy, disk-based backup and recovery solution. VDP is fully integrated with VMware vCenter Server and the VMware vSphere Web Client. VDP enables centralized and efficient management of backup jobs while storing backups in deduplicated destination storage.Q: Is VDP replacing VDR (VMware Data Recovery)?
Yes. VDR is not supported with vSphere 5.1 and higher. VDR is being deprecated, but will be supported as detailed in the VMware Life Cycle Policies.Q: Will I be able to use my backups from VDR with VDP?
Yes. A migration tool is included with VDP 5.1.10 and later releases. This tool handles migration of data and restore points. Backup jobs cannot be migrated. For more information, see:
- The VMware vSphere Blog post, vSphere Data Protection (VDP) Version 5.1.10 is Generally Available.
- Migrating restore points from VDR to VDP (2051891)
Q: Do I need additional licenses to use VDP 5.x?
VDP is included with vSphere Essentials Plus and higher.
Q: How is VDP deployed?
Like VDR, VDP is an appliance that is delivered as an OVA template. Each OVA is preconfigured with destination datastore sizes of 0.5 TB, 1 TB, and 2 TB. Note that the actual storage consumed by the appliance is greater than the destination datastore sizes.
Q: How does VDP compare to VDR?
VDR was a first generation solution bundled with vSphere 4 for the rapidly growing backup market and experienced rapid adoption by VMware customers. However, in the constant effort to deliver more value to customers, VMware has been actively working on improving data protection and disaster recovery with enhanced backup and replication solutions. This led VMware to introduce a new, more robust product in the form of VDP. To maximize customer value, VMware decided to collaborate with the EMC Avamar team, who has world-class industry leading expertise in backup and recovery technology to build the underlying foundation for VDP.
Q: Is it possible to mount a CIFS of NFS share directly from the appliance and use these as backup data destinations?
Mounting a CIFS or NFS share directly from or “within” the appliance is not supported. The VDP appliance vmdk files can be deployed to a NFS share mounted by a vSphere host. Windows based NFS shares are not supported.
Q: Are there any limits for VDP?
VDP supports these specifications:
- Each vCenter Server can support up to 10 VDP appliances.
- Each VDP appliance supports backup for up to 100 virtual machines.
- Only 1 VDP appliance can exist per ESXi/ESX host.
- Support for 0.5 TB, 1 TB, or 2 TB of deduplicated backup data.
Q: Is PowerCLI supported with VDP?
No. PowerCLI is currently not supported with VDP. VMware recommends filing a Feature Request to address this.
No. Each VDP appliance operates independent of other VDP appliances.
Q: VDP comes in 3 different OVA sizes: 0.5 TB, 1 TB, and 2 TB. Why is this, and is this all the space I need for the appliance?
VDP comes preconfigured with the destination datastores already attached. The OVA sizes indicate the size of the destination datastore. Additional space is required for the operating system and VDP operations (checkpoints, logs, etc). The amount of disk space required is:
|OVA Size||Disk Space Required|
|0.5 TB||850 GB|
|1 TB||1600 GB (1.57 TB)|
|2 TB||3100 GB (3.02 TB)|
- In VDP 5.5 one OVA size is available, you will be prompted to choose the size of your deduplication store during configuration.
- When a VDP appliance is deployed, additional space cannot be added to an existing appliance. If more destination datastore capacity is needed, a new VDP appliance can be deployed (up to 10 appliances can be deployed per vCenter Server).
- When sizing a datastore to house a VDP appliance, consider if the virtual machine swap file will also reside here and allocate sufficient space.
This depends on your environment: How many virtual machines are being backed up, the various OS types, and the amount of daily I/O being generated.When a new VDP appliance is created, the destination datastore begins to fill rapidly on each new virtual machine backup added. This is due to the fact that each virtual machine being backed up contains unique data. To help reduce the amount of unique data being backed up, and therefore reduce the rate of growth on initial virtual machine backups, it is best to group similar backups together. For example, the initial backup of two Windows 2008 virtual machines requires less destination datastore space as similar data results in better deduplication efficiency. The initial backup of a Windows 2008 virtual machine and a Linux virtual machine would likely require more destination datastore space as there are unlikely to be similar data. After the initial backups, the VDP appliance backs up less unique data during subsequent backups. This is due to the Changed Block Tracking functionality in vSphere and deduplication in the VDP appliance.However, if you are unsure of destination datastore capacity requirements, it is better to deploy a larger VDP appliance. When the appliance has been deployed, additional capacity cannot be added.Q: Can I expand my destination datastore within VDP?
Yes, if using VDP Advanced. If using VDP Basic and require additional space, a new VDP appliance must be deployed (up to 10 per vCenter Server). It is not possible to migrate data from the original VDP basic appliance to a new, larger appliance.
Yes. Full DNS resolution (shortname, FQDN, forward, and reverse) must be configured correctly for VDP to work. If there are DNS issues, VDP operations, such as backups, are impacted. A DNS host record for a VDP appliance should be created prior to deploying the VDP appliance.Q: What’s a blackout window?
The blackout window is the portion of each day reserved for performing server maintenance activities, such as garbage collection, which require unrestricted access to the server. Garbage collection deletes the orphaned chunks of data that are no longer referenced within any backups stored on the system. By default, the blackout window begins at 8 AM local server time and continues uninterrupted for three hours until 11 AM that same morning. This can be customized.Note: No backup or administrative activities are allowed during the blackout window, however restores can be performed.Q: What’s the difference between the blackout window and the maintenance window?
The maintenance window is the portion of each day reserved for performing routine server maintenance activities such as integrity check validation, whereas the blackout window performs server maintenance which requires unrestricted access.
Note: Backups can be initiated during the maintenance window, but doing so impacts both the backup and maintenance activities.
Q: Can I set a blackout window to 0?
No. A blackout window is required. It is possible to customize when the blackout window occurs.
Q: What are checkpoints and when would I be required to use them?
A checkpoint is a system-wide backup taken for the express purpose of assisting with disaster recovery. Checkpoints are scheduled and created once a day during the maintenance window. VDP stores two checkpoints (one validated and one not validated).
Q: What happens if rollback doesn’t work?
If a rollback fails, then deployment of a new VDP appliance is required. Migrating configuration and backup data from one appliance to another is not supported in VDP 5.1, this functionality was added in VDP 5.5.
No. The backup jobs are scanned at the start of the backup window. If the job does not exist at this time, it will not run. It will be scheduled to automatically start at the next backup window. However, you can manually start a backup job during the backup window.Q: Can I schedule backup jobs to run at different times?
In VDP 5.1.x, there is only one backup window per VDP appliance. The backup jobs are run during this backup window. It is not possible to create separate backup windows for each backup job. When creating a backup job, it is possible to define how often the backup runs. For example, daily, weekly, or monthly.
Each VDP appliance can simultaneously back up a maximum of eight virtual machines.Q: My backups are taking too long, what can I do?
If the requirement is only to protect the data, the administrator can select only the virtual machine disk containing the data, which helps minimize backup capacity consumption. For more details, see the Backup section in the vSphere Data Protection Overview guide.
The file-level restore is web-based, so a supported web browser is required. At the time of writing, a command-line FLR is not available.Q: Are there any prerequisites to use the FLR?
A web browser is required to connect to the VDP appliance. VMware Tools must also be running within the virtual machine where the file-level restore is occurring.Q: Am I able to restore a backed-up virtual machine’s virtual disk to different datastores?
It is possible to restore a virtual machine to a datastore other than the original. However, all files that make up the restored virtual machine are restored to the same datastore.Q: Can I perform a Restore Rehearsal, as I used to do in VDR?
VMware vSphere Data Protection is VMware’s backup and replication solution, powered by EMC Avamar. It delivers storageefficient backups through patented variable-length deduplication, rapid recovery and WAN-optimized replication for DR. Its vSphere-integration and simple user interface makes it an easy and effective backup tool for vSphere. It provides agentless, image-level VM backups to disk and application-aware protection for business-critical applications (e.g., Exchange, SQL Server) along with WAN-efficient, encrypted backup replication across sites.